5-axis vice for demanding applications

The most impressive feature of the WNT X5G-Z 5-axis clamping system, launched with the new Ceratizit Up2Date catalogue, is its optimised access from all sides, which allows components to be machined on five or even six sides. What is more, the vice is very easy to operate and significantly reduces the setup time.

The lean, tapered contour of the two (mobile) fixed jaws provides the spindle head/tool with optimum access to the workpiece. The jaws also contain elastomer elements which damp vibrations, thereby playing a role in improved surface quality and increasing the service life of the tool and spindle.

The system’s jaws and their adapter also have a distinctive feature. They sit on a special dovetail guide that the user manually clicks them into – in just a matter of seconds with no screws or tools required. The structural design incorporates a pull-down action. This means that after the clamping process, the workpiece is secured with great precision and tends to be pulled downwards in the clamping device through redirection of the forces, which considerably minimises any lifting during machining.

Ceratizit offers 14 different jaw styles with widths of 40, 65, 80 and 125mm, of which two 125mm jaws are already included in the scope of supply of a new X5G-Z as part of the basic equipment. The quick change jaws have a classic L-shape and are designed as indexable jaws. The open angle means they can be used inwards or outwards – a feature which opens up additional options, without extra cost.

The WNT X5G-Z clamping system comes in five models and two heights, which differ in the length of their base bodies. The shortest measures 330mm; while the other models are 430, 500, 630 and 800mm long. The mechanical spindle which ensures the workpiece is clamped between the jaws has a basic clamping stroke of 140mm as standard (without conversion). It can be easily extended for larger components up to a clamping range of 690mm – provided the base body is sufficiently long.

A quick change system means conversion takes just a few minutes and can be carried out (like the system jaw exchange) without tools. Another plus point comes in the form of the fully encapsulated spindle, which protects it from chips and makes it almost maintenance-free.

A smart solution has been developed for machining the sixth side. To do so, the user positions the second fixed jaw, responsible for the clamping stroke, in place with a screw.

Once this is done, the workpiece is pulled onto the jaws through an active pull-down action. This ensures that the jaws do not tip up and that the sixth side can be machined to an exceedingly high level of quality. Therefore, the WNT X5G-Z can be used for complete five-side machining on a 5-axis machine with a clamping device.

www.cuttingtools.ceratizit.com/gb/en/x5gz