CAM software crucial to recovery

Sébastien Jaeger, Sandvik Coromant’s industry solution manager – aerospace, explains why manufacturers should adopt a more holistic tooling solution to achieve growth during post-Covid recovery. 

For decades, aerospace has been an industry characterised by growth. There have been crises over the years, but never one so deep and heavy as Covid-19. Now that market levels have return to those seen in 2006, how can aerospace manufacturers get back on track? The answer lies in more sustainable manufacturing.

The aerospace industry had been growing consistently for 14 years when the pandemic struck. There’s no doubt that trends and the future of aerospace have been immensely affected by the unprecedented coronavirus pandemic. There has been exponentially reduced business or vacation travel, while airlines have had to adjust to substantially lower levels of profitability. This has changed the trends.

It isn’t all bad news. The aerospace sector saw some improvement in the first half of 2021; but success is tied to several other factors like vaccinations and the global economic outlook with factors like Chinese economic prosperity, business and holiday travel recovery all having an influence. Projections estimate the industry will be back to where it was, pre-crisis, within the next two-to-three years.

Another big change, from an engineering perspective is that passenger aircraft will be single aisled rather than twin aisled. There will be less wide-bodied aircraft, with a longer flying range. Engines and frames are closely connected: one doesn’t go without the other, but with engines we can say the focus is on sustainability.

There are different ways of approaching this. One is to find alternative fuels using existing engine tanks, such as synthetic fuel, biofuel or hydrogen. Then you have new engine architecture with large manufacturers presenting new types of engines, which is a longer-term approach. Then we have alternative forms of engines that are electrified, battery-driven or electromagnetic, or hybrid engines where current engines are assisted by electric power motors.

Challenging materials

If we look at the automotive industry, it’s already there with new electrified and hybrid systems. Aerospace OEMs, meanwhile, are still working on these systems and many of these developments are not expected to find widespread use before 2035. Reductions in noise, weight and emissions will of course affect how these electric systems perform, but there are challenges. What’s more, batteries are heavy when designers and engineers want planes that are lighter to travel longer distances.

For a component like the aircraft’s fuselage, OEMs are going in two different directions. On the one hand, we are seeing increased use of aluminium, although aircraft components require new types of aluminium with greater strength, fatigue resistance and other attributes.

Another approach is to explore other shapes of aircraft like delta shape, blended wing body and strut braced wing, or where the engine is more integrated into the fuselage. Here, engineers will more likely turn to composite, or composite-ceramic combinations and mixed materials. Whether these designs become popular remains for be seen. For now, we can be sure that more aluminium will be used and also heat resistant super alloys (HRSAs).

However, even the best aircraft component manufacturers can be inexperienced in manufacturing these tougher materials. That’s why they are turning to Sandvik Coromant.

Component solutions

Sandvik Coromant offers component solutions in response to the growing pressure on machinists to multi-task. Rather than focus on one machine, today’s engineers can operate four or five machines a time, which gives them less time or opportunities to focus on specific processes. But, what do we mean by a component solution? It refers to taking a more holistic perspective, which means it’s not just about the tools Sandvik Coromant provides but also about assisting with the complete process.

That was the case when a Sandvik Coromant customer in aerospace was experiencing challenges when machining HRSA materials. The customer’s existing approach required multiple machine tools, with poor chip control and long cycle times. There were issues with inconsistent tool life and unreliable processes, and the machining operation often required full-time monitoring by an operator.

For high-value projects like these, Sandvik Coromant’s component solution has several stages. They include looking at the machine requirements, time studies to examine the cost-per-component, and analysing production methods at the run-off related both to Methods-Time Measurement (MTM) and end-user processes. It also includes CAM programming and project management of local or cross-border projects.

These analyses revealed we needed to change the customer’s programming strategy to solve its chip breaking problems. In combination with the tool, Sandvik Coromant’s specialists developed a new strategy with dynamic drive curves, which allowed us to control the chip breaking in every moment. We called this new approach scoop turning and now have a patent over it.

Scoop turning resulted in very good savings for the customer. Besides great chip control, the customer also achieved an 80% cycle time reduction and doubled tool life. It was able to reduce its use of four machine down to one, reducing the need for multi-tasking, with more secure machining processes and green light production.

This shows how a more holistic approach can benefit a manufacturer’s bottom line. Software also plays a vital role, such the Tool Guide that’s part of the CoroPlus portfolio. Customers can make crucial decisions on the choice of tool and cutting parameters before they have even commenced production.  

More sustainable turning

Aerospace manufacturers are taking different approaches to tackling sustainability. Nevertheless, Sandvik Coromant found it is possible to develop a bespoke solution for one customer that has since benefited entire industries.

To help the customer perform better turning operations on HRSAs, Sandvik Coromant’s response was to develop the S205 turning grade. The material is coated with second generation Inveio coating for high wear resistance and long tool life, while post treatment technology strengthens the S205 insert by modifying its mechanical properties. The material has an Inveio layer characterised by tightly packed, unidirectional crystals which create a strong protective barrier around the insert. This maximises thermal protection and improves crater wear with better flank wear resistance.

The material is well-suited for machining components such as aircraft engine turbine discs, rings and shafts. Our customers have reported 30-50% higher cutting speeds with S205 compared with competing HRSA turning grades, and these results were achieved without compromising tool life. S205 has since benefitted several manufacturers in aerospace and other industries.

Again, these results were also achieved with a holistic approach, specifically Sandvik Coromant’s PrimeTurning ethos that allows all-directional turning for maximised productivity. The methodology is based on the tool entering the component at the chuck and removing material as it travels towards the end of the component. This prioritises all-important metal removal rates for faster, quality production and changeovers. In some cases, our customers have completed production runs with just one tool changeover when, with a competitor’s tool, they would have needed five.

Aerospace may be facing one of its biggest crises yet, but there is light behind the clouds. Sandvik Coromant continues to support all the leading aerospace OEMs to support their post-pandemic recovery, marrying sustainability with better tools and optimised cutting parameters with a holistic approach to tooling.

www.sandvik.coromant.com