GKN achieves liquid hydrogen fuel system demonstrator milestone

GKN Aerospace says it has successfully achieved a major milestone delivering a ground-based demonstrator of a liquid hydrogen aircraft fuel system.

The demonstrator was designed, built and tested in collaboration with Filton Systems Engineering, under the Innovate UK-funded Safe Flight project. The goal of the project was to investigate the feasibility of using a liquid hydrogen fuel source to increase the endurance of a search and rescue uncrewed aerial system (UAS) concept.

The project enabled GKN to understand and address many of the safety concerns raised by the introduction of such a novel fuel. Integrated fuel tank design and distribution solutions were developed, including vaporisation and conditioning of the liquid hydrogen. The performance of the fuel system was verified by coupling it with a proton exchange membrane (PEM) fuel cell stack, representative of the type that could be installed on a future zero emission aircraft. The project demonstrated successful storage and management of liquid hydrogen, supplying the fuel cell power system with hydrogen at the required temperature and pressure over a range of electrical loads typical of a UAS search and rescue mission.

Key outcomes of the project include development of safe system design, manufacturing knowledge, operational knowledge for liquid hydrogen fuel systems, hydrogen fuel system test data, and an adaptable test rig suited to further study of hydrogen components and subsystems.

Max Brown VP Technology GKN Aerospace said: “We are delighted with the outcome of this project and believe we are very much at the forefront of exploring the challenges in this area. In a single end - end test environment the team have demonstrated fuelling and storage of liquid hydrogen, conditioning and distribution of cryogenic gas, and the use of PEM fuel cells to generate electrical power.

“While the focus of this work was on a small scale platform, the achievement is highly aligned with other work we are conducting in programmes such as H2GEAR, where we are delivering propulsion technologies focussed on enabling zero emissions flight.’’

The Safe Flight project has positioned GKN Aerospace for larger and more complex demonstrations of hydrogen-powered aircraft in the future, as the company continues to pursue its mission to become “the most trusted and sustainable partner in the sky.”

www.gknaerospace.com

Company

GKN Aerospace

Related Articles

New consortium to develop Liquid Hydrogen Tank technology

A new project led by aerospace manufacturing specialists, TISICS, aims to develop lightweight components to reduce the environmental impact of the aviation sector. This project focuses on hydrogen as a zero-emission fuel for commercial aircraft to help the UK deliver its pledge for Net Zero emissions by 2050.
2 months ago News

Peli unveils high-impact Drone and UAV protection cases

Peli Products says professionals and drone enthusiasts can count on the design and manufacture of its high-performance protective case solutions as the reliable partner for protecting fragile drones, multirotor systems and unmanned aircraft systems.
5 years ago Products

CATEC wins innovation radar prize for advanced aerial contact drones

The Center for Advanced Aerospace Technologies (CATEC), located in Seville has won the prestigious 2017 Innovation Radar Prize, an initiative promoted by the European Commission through the Directorate General for Communications Networks, Content & Technology (DG CONNECT), with the aim of promoting innovations from all over Europe that present a high potential for its later application in the market.
5 years ago News
Most recent Articles

It’s time to get ready for JEC World 2023

After the exceptional 2022 edition, JEC World, the leading international trade show dedicated to composite materials, their manufacturing technologies and application markets, will take place in Paris from April 25-27, 2023.
2 hours ago News

Fastems launches new digital service

Fastems has launched a new digital platform called myFastems which is a complementary service for all its customers – in particular those using Manufacturing Management Software (MMS) version 6+.
2 hours ago News

Login / Sign up