Kennametal introduces FIX8 for heavy-duty turning

Kennametal has released the FIX8 heavy-duty turning system, delivering maximum metal removal rates in steel, stainless steel and cast iron.

With eight cutting edges per insert, the FIX8 turning system increases productivity of any heavy-duty turning operation, providing the lowest cost per edge while reducing cutting forces up to 15%.

FIX8 has eight cutting edges per insert, providing the lowest cost per edge. The tangential design allows it to sustain far higher loads than traditional designs.

“FIX8 is designed to cover a wide range of applications, including turning and facing, smooth surfaces, interrupted, and heavily interrupted cuts. From medium depth-of-cut to roughing in steels, cast iron, and challenging materials like stainless steel, FIX8 handles it all. Even extreme feed rates of up to 1.4mm (0.055") and depths of cut up to 12mm (0.472") are possible with FIX8,” says Matthew Fuerst, product manager, Kennametal.

The tangential design of the FIX8 insert features a rigid clamping system that pulls the insert securely into the pocket seat, offering superior stability that enables the insert to withstand large cutting forces and vibrations for optimal performance. The insert is also supported by a replaceable carbide shim, protecting the pocket against deformation and damage.

The FIX8 tool holder features precision 3D coolant technology, supplying sufficient coolant precisely where needed. Three coolant nozzles are directed to the rake face, controlling temperature, chip evacuation, and supporting chip formation. Coolant exit holes in two different locations are directed toward the flank of the insert, controlling the heat in the cutting zone and prolonging tool life.

The FIX8 is said to provide excellent chip control for any heavy-duty turning application while increasing tool life. The insert design reduces cutting forces and power consumption, making it ideal for any low horsepower lathe.

www.kennametal.com

Company

Kennametal [**]

Related Articles

Turning on the edge

Five insert edge preparations for different hard metal turning applications when using Sumitomo Electric Hardmetal’s BNC2010 and BNC2020 cubic boron nitride (CBN) inserts, are said to enable specific process situations and problems to be overcome giving higher stability and greater operational consistency.
4 years ago Products

Diamond-tipped tools forever

Diamond-tipped Supermini and Mini tools with internal cooling directly to the cutting edge are the latest additions to the products Horn offers for boring, profiling and grooving.
4 years ago Products

The new face of face milling

Aerospace Manufacturing discovers how Sandvik Coromant is helping to lower cost per component with the introduction of its CoroMill 415 high feed face mill indexable insert cutter solution.
4 years ago Features
Most recent Articles

Login / Sign up