Materialise and EOS supply first PA-FR 3D-printed parts to Airbus

EOS (1)
EOS (1)

Materialise has announced its qualification by Airbus to manufacture flight-ready parts using laser sintering technology.

The material used in the process, produced by EOS, is a flame-retardant polyamide (PA 2241 FR). With this development, Materialise and EOS become the first suppliers to be qualified by Airbus to produce laser sintered parts under the Airbus Process Specification AIPS 03-07-022. Materialise now offers two 3D printing technologies approved by Airbus for flight-ready parts.

The qualification is valid across Airbus and marks a significant milestone for the wider adoption of polymer 3D printing in aerospace. PA 2241 FR offers Airbus and its suppliers a cost-effective complement to the initially validated 3D printing material Ultem 9085, also used at Materialise. By bringing laser sintering on board, Airbus broadens its usage of 3D printing with the world’s second most commonly used 3D printing technology. In addition to the material PA 2241 FR, qualification also encompasses the respective processes for 3D printing the material on EOS systems. In particular Materialise will leverage EOS systems including the EOS P 770 to manufacture PA 2241 FR parts for Airbus.

Bart Van der Schueren, Materialise CTO, commented: “This achievement consolidates our long-term partnership with Airbus, and it also opens up additional 3D printing applications to Airbus and its suppliers. Laser sintering is one of the most widely used 3D printing technologies and enables complex design features such as interlocking mechanisms. It’s an honour for Materialise to be Airbus’s first manufacturer for the technology.”

EOS PA 2241 FR, the newly qualified material, is a flame-retardant Polyamide12-based material which is used for processing in laser sintering systems. Due to its high refresh rate, PA 2241 FR enables cost-effective production while meeting the strict quality standards required of flight-ready parts. Typical aerospace applications include aircraft interior parts such as air ducts and brackets. The material is suitable for parts which must fulfil fire, smoke and toxicity (FST) requirements, without use of a primer and top coating.

Markus Glasser, senior vice-president EMEA, EOS, said: “We are very proud that after an extensive testing programme, Airbus qualified the EOS PA 2241 FR material and processes for usage globally by the company. It underlines the high maturity and constant quality of EOS’ powder and systems and continues to emphasise the relevance of industrial 3D printing in both polymers and metals.”

The qualification is an important milestone in the deployment of Polymer AM technologies in Airbus. Materialise began its journey with Airbus several years ago when FDM technology was introduced on the A350 system. This new capability will enable an increase of applications on commercial aircraft and, as well, on the products developed by the other Airbus Divisions.

Materialise currently prints around 100 different part numbers for the Airbus A350, totalling an estimated 26,000 parts per year across the A350 ecosystem. Additionally, the company is also set to supply parts for other Airbus aircraft platforms including the A320, A330, and A340. For this, EOS industrial 3D printing technology plays and will play a key role.

www.materialise.com

Company

Materialise

Related Articles

TCT 3Sixty brochure

If you’re a designer, engineer or manufacturer looking to evaluate, adopt or optimise 3D printing for your business, TCT 3Sixty is the event for you.
1 year ago Sponsored Content

From ideas to reality

Proto Labs director, Damian Hennessey looks at how the UK aerospace industry is undergoing a transformation via the increasing adoption of digital manufacturing processes.
7 years ago Features
Most recent Articles

Carter enjoys success at HAI HELI-EXPO event

Acknowledged as the World’s largest vertical aviation conference and trade show, HAI HELI-EXPO 2024 provided precision bearing specialists Carter Manufacturing a perfect opportunity to exhibit its extensive range of aerospace bearing installation, removal and testing tools, along with PMA bearing options.
1 day ago News

Login / Sign up