People, process, principle

Trinity Precision’s motto is ‘People, Process, Principle’
Trinity Precision’s motto is ‘People, Process, Principle’

An aerospace parts supplier in Wichita, Kansas, has built a business on these three pillars. VERICUT toolpath simulation and optimisation software from CGTech helps support the second one.

Integrity and experience. Consistent performance. Clarity of purpose. These are words to live and work by no matter what your vocation. They’re also the guiding philosophies behind Trinity Precision’s motto, “People, Process, Principle,” and ever since founders David May, Steve Ford, Dave Tice, and Chris VanNover opened the company’s doors in 2014, they’ve stood by them.

“When we started Trinity, it was important that we establish the foundations needed to assure success for the company and its employees,” said VanNover, Trinity Precision’s vice-president of operations. “One of these was the use of robust programming technology, which includes accurate, productive toolpath simulation. VERICUT has filled that role since day one.”

No other option

CNC programming manager, Merritt Stuever has been there for the past five years. Like VanNover and the rest of the company’s management team, he also has great respect for VERICUT, including his time at Trinity Precision, he’s been using the product for nearly two decades.

“After running a program through VERICUT, you’re not only assured that the G-code is consistent with a good part, but you also eliminate any chance of a crash,” he explains. “Considering the cost of replacing a spindle and the machine downtime that comes with it, it’s a simple choice. VERICUT’s a no-brainer.”

Trinity Precision 32,000ft2 manufacturing facility boasts a fleet of advanced CNC machinery
Trinity Precision 32,000ft2 manufacturing facility boasts a fleet of advanced CNC machinery

To say that Trinity Precision is heavy into aerospace work is an understatement. Its customer list includes Boeing Commercial and Defence, Northrop Grumman, Gulfstream, Textron Aviation, and more, OEMs with zero tolerance for deviation in part quality or missed deliveries. As such, strict adherence to established processes is critical, which helps explain the aerospace supplier’s early focus on “the three Ps” in its logo, along with its reliance on sound programming procedures.

VanNover explained that Trinity Precision president, David May purchased an existing “mom and pop” machine shop as a starting point for the new business. The previous owners were using a well-known brand of CAM software and had a single seat of CATIA from Dassault Systèmes that was gathering dust. May and his management team hit the reset button.

Starting from scratch

“We knew from previous experience that implementing change once you’ve reached a certain size can be difficult, so we took the opportunity early on to build everything right from the ground up,” he says. “We stayed with CATIA because that’s what most of our customers require, and like I said, invested in VERICUT. It does everything that we need it to do, and seeing as we were looking forward to a lot of new CNC equipment back then, also liked the fact that we can develop our own machine tool models. It gives you a lot of flexibility.”

Today, Trinity Precision boasts 32,000ft2 of manufacturing space and a fleet of advanced CNC machinery. It has also enjoyed four-fold revenue increase since those early days. VanNover noted that, like most in the aerospace industry, the pandemic-related slowdown in commercial aviation gave them “a pretty significant haircut” over the past two years, but that tide appears to be turning, and Trinity’s 70+ employees stand ready for future growth.

Every job goes through VERICUT before leaving the programming office
Every job goes through VERICUT before leaving the programming office

As noted previously, however, that growth depends on robust processes, something Stuever and the rest of the engineering team spend their days developing. Every CNC machine tool has a standard tool list, greatly reducing setup time and eliminating the chance that an operator will place a cutter in the wrong position.

In addition, all feedrates, cutting speeds, and other machining parameters are similarly standardised within CATIA. Offline presetting is used, and many of the machine tools employ tool breakage detection for automated operation. And every job goes through VERICUT before leaving the programming office, a requirement that Stuever noted has saved the company countless hours of rework and even scrap.

Simulation, no exceptions

“We’re mostly a high-mix, low-volume shop, so oftentimes we might have a couple of dozen new part numbers in a week,” Stuever said. “Since none of us can read and visualise hundreds of thousands of lines of G-code, VERICUT is the best way to check for interference, gouging, leftover material, and any of the other everyday programming scenarios that can lead to a bad part or worse. And since you know the software will catch things like that, it makes the programming process both easier and faster.”

Stuever’s also quite pleased with CGTech’s support level. He’s taken several classes over the years and attended multiple VUE sessions (VERICUT Users’ Exchange). Because of this, he’s come to know many of the people in the software developer’s Irvine headquarters.

“They’re very helpful and always take the time to make sure any issues or needs are resolved,” he said. “As far as technical support goes, there are only two companies that I rank extremely high. CGTech’s one of them.”

VanNover offered similarly high praise. “The rest of the management team and I have worked in shops where machinists were out there changing programs, selecting their own tools, and pretty much doing their own thing, but you just can’t operate like that anymore, especially with the available labour force. This is why we’ve taken most of that responsibility and put it in the programmer’s camp, making it critical that you have the right software tools. And so even from the very start, this was a non-negotiable aspect of our desire to lay the right foundation; VERICUT is a big part of that foundation.”

www.cgtech.co.uk

Company

CGTech

Related Articles

Axes of production power!

Aerospace subcontractor, TGM expands its 5-axis machining capabilities with the latest addition of a Hurco SR series CNC mill.
6 years ago Features

Carving out a niche market with cam software

With the ethos of “If you want it made, we can make it”, Aerotech Precision Manufacturing discusses its use of CNC Software’s Mastercam CAD/CAM software with the Solidworks plug-in feature.
6 years ago Features
Most recent Articles

Instron’s 6800 Series testing systems on display at JEC

At this year’s JEC World event, Instron (hall 5, stand M95) will be featuring the latest 6800 Series universal testing systems, which are designed to conduct an expansive variety of tests on composites and many other materials used in the aerospace, raw materials, biomedical, automotive, and consumer electronics industries.
2 days ago News

Login / Sign up