The green aviation club

AMJune21Features - parker1
AMJune21Features - parker1

Flying under their own power has fascinated many people since the dawn of humanity. Next year, a human-powered aircraft race across the English Channel will test both pilots and planes. Ian Parker reports.

 

Since humans evolved enough to think about birds, they’ve wondered if they could fly like them. Greek mythology tells the story of Daedalus and Icarus who had wings of feathers and wax, but the wax turned out to be too temperature sensitive.

Entries in the Icarus Cup 2013

The problem with the pilot providing the power is that there’s so little of it - most people can produce only about a third of horsepower by pedalling. This is one hundredth of the power in the smallest-engined aircraft. So human-powered aircraft (HPAs) have to be extremely light, but strong enough to survive some turbulence and maybe a few gentle crashes. Joining methods have to be equally light and strong.

HPAs fly slowly and just above the ground or water, so crashes or structural failures are not serious - no one has ever been seriously hurt in an HPA crash. So no licences are needed and anyone can build one. The risk is less than riding a bicycle.

Structures are made largely of carbon fibre-reinforced plastic (CFRP) materials, foam and a thin covering, so they are very light and strong. The adhesives and fasteners have to be equally light and strong. In the early 1980s, I flew an inflatable HPA called Phoenix, which was made mostly of Mylar glued together with Bostik 1755 adhesive. All fasteners were designed and made by the aircraft designer/constructor, Fred To. I crashed it in a London park with neither me nor the plane being damaged.

Later, flying in London’s Docklands (they weren’t built up then), we achieved a cruise speed of 4mph and accidentally gained the world record for the world’s ‘slowest’ aeroplane. The HPAs which will fly across the Channel next summer will cruise faster, but not dangerously so. Fred To conceived the race and has put together the team which will run it.

The race will commemorate the 60th anniversary of the first recorded HPA flight which was Southampton University’s Man Power Aircraft (SUMPAC) which Derek Piggot flew at Lasham airfield in 1960. He covered a distance of 64m, climbing to a height of 1.8m. The race was to have been held this year, but it’s been delayed a year because of the Covid lockdown. It’s not just about aircraft design, but also encouraging fitness and interest in the STEM subjects. Large scale aviation is under pressure to be more green. You won’t find any aircraft greener than HPAs.

Linda Chang irons the Mylar covering on the underside of a DaSH wing section

Up to four aircraft can enter the race and designers and builders worldwide are putting forward their aircraft. Take off will be from The Warren, about four miles east along the coast from Folkestone, England and landing will be on the beach at Cap Griz-Nez in France. Each aircraft will be accompanied by a boat in case it has to ditch along the route. The boats will carry rescue swimmers to ensure the pilot gets out safely.

One of the main aims of the race is to encourage the designing and building of HPAs, particularly by young people, to encourage their interest in technical subjects and keeping fit. Very short flights can be made in many places and because they fly low and slow, HPAs do not involve high risk. A longer-term aim is to encourage people to take up HPA flying as a sport. In 2012, the Icarus Cup was launched which sees several aircraft and teams meeting on a UK airfield each year to compete.

Design and construction

Designing and putting together an HPA is now within the grasp of many groups because of advances in aerodynamics, materials, structures and fastening systems. Years ago, the involvement of an aeronautical engineering department was recommended because the science was not that well understood.

US HPA designer/pilot and team leader, Alec Proudfoot recently told The Telegraph: “Crossing the English Channel in a human-powered aircraft has been done, once before – barely. It was one of the most amazing athletic achievements of our time. To think that several international teams are going to attempt the same feat, on the same day, in a race to see who is the fastest, seems almost a bit bonkers. It will be a huge technical and logistical challenge, but most of all a supreme test of athletic and piloting skill.”

Lined up to take part so far are Wiltshire-based Team Aerocycle and a team from Bordeaux University, with others expected to join over the coming weeks. The fastest to complete the crossing will receive a £50,000 prize, with £10,000 going to the second fastest and a prize of £5,000 for the fastest female pilot.

“Flying a human powered aircraft takes between 300 and 400W of power,” says HPA designer Fred To, the race instigator. “To keep this up over the several hours crossing will require levels of stamina close to what is needed in the Tour de France.”

Proudfoot at the controls of DaSH on the first flight in 2015

One of the most successful current HPAs is DaSH (Dead Simple HPA), designed, built and flown by Proudfoot.

“The bulk of the joining of things on the airplane is done by glues and epoxies,” he states. “These are carefully apportioned and weighed out, with glues used in very thin layers - or where appropriate, in small spots rather than full layers - with many tests done before final parts are built, to minimise the total amount of glue used to keep the weight down.”

One example of how the DaSH team worked out the 'right' way to make a part concerns the rib caps on the wing and tail ribs. The team tried virtually all types of adhesive to see which worked best and make the lightest, strongest parts. After running many tests, all types of glues were found to work to some extent, but the polyurethane glue made the strongest and lightest bond.

Time is tight

HPA designs are mainly about keeping the weight down. Most current HPAs are about half the weight of the pilot. This gives the pilot/aircraft combination endurance - it can stay up quite a while. To win the race, speed will be important, so it will be a speed/endurance combination that will win the day. The flight of just over 20 miles might be competed in just over two hours. A windless dawn will be chosen for the race, but a light tail wind might arise; the route is about eastward and the prevailing wind westerly.

Teams have just over a year to get their aircraft built and ready for take-off. The sciences of materials, joining techniques, aerodynamics and fitness will be pushed to the limit in aircraft where efficiency means everything. A well-known phrase in aircraft design is “simplicate and add lightness.” In planning and building an HPA, it could not be more appropriate.

https://thegreatrace2022.com

Related Articles

Preparing for a hydrogen-fuelled future

Paul Adams, director and aerospace & defence sector specialist at top-20 management consultancy, Vendigital examines hydrogen’s potential for transforming the sustainability of modern air travel, and the practical challenges that stand in the way of aviation’s hydrogen-fuelled future.
10 months ago Features

The sky’s the limit

Douglas Campbell, technical director of energy storage solution specialists, Electroflight examines the design and manufacturing process of the battery for Rolls-Royce’s zero-emissions aircraft, and how Ansys played a crucial role in simulating materials selection, structural integrity and balanced cooling.
5 months ago Features

Editor's comment: Worth its weight in gold?

Like an ancient alchemist trying to turn base metal to gold, today’s metallurgists are constantly striving to find that elusive chemical recipe that will produce an alloy with the kinds of mechanical properties our manufacturing industry is crying out for.
4 weeks ago Features
Most recent Articles

Login / Sign up