Titanium parts produced 25% faster on Heller machining centre

AMAug18News - heller
AMAug18News - heller

Horizontal machining centre (HMC) specialist, Heller Machine Tools says it has supplied a large, heavy-duty machine to GKN Aerospace Filton, near Bristol to rough titanium aircraft components.

It was installed on budget and ahead of schedule during the latter part of 2017. This year, it started producing a family of five structural components from titanium forgings, 24 hours a day, seven days a week.

Six years ago, there was a possibility of the Integrated Machining Facility (IMF) at Filton also being contracted to finish-machine the components. This work has not materialised, but it meant that a large, 5-axis machining centre (from a different supplier) had to be installed at the outset to allow for both roughing and finishing operations to be completed.

During 2017, the customer doubled the lot sizes to be manufactured, mirroring a similar increase in 2016. A second machining centre was therefore needed to cope with demand, but as the contract remains for roughing only, leaving a 3mm stock allowance ±0.127mm over the entire surface of each part, a more cost effective 4-axis CNC machine was deemed sufficient for the task.

Six potential HMC suppliers were considered, half of which were shortlisted. John Hendry, project improvement engineer and Mike Davis, engineering group leader, opted for a Heller H 16000 with a high-torque spindle, due in part to its robust construction and well-proven technology. Additionally, despite the machine's size and rigidity, its installed weight at less than 50tonnes allowed it to be positioned in the Filton facility where there is a solid, 300mm thick floor, without the need for any special foundations.

"The Heller machine was the best value solution for us at the quality end of the market,” stated Hendry. "We were also reassured that the German-owned company has a manufacturing presence in the UK, at Redditch, where they produce the smaller versions of these 4-axis machines.

"It means that there is a strong engineering capability nearby, if it is ever needed. Support has certainly been readily available so far, both from the UK and also from the German factory."

Mark Edwards, operations group leader of the Hard Metal Cell within the IMF, took advantage of the H 16000's arrival to re-engineer all five titanium aircraft parts. None require simultaneous milling in more than three CNC axes and he was able to find significant cycle time savings on the 4-axis machine compared with the 5-axis process routes.

New strategies include taking lighter, faster cuts with solid carbide mills and reducing the number of inserted tools. This has the benefits of assisting penetration of 60-bar coolant to the point of cutting, increasing metal removal rate, improving surface finish by reducing the chatter from interrupted cutting and prolonging tool life.

For the largest of the five structural components, which measures 2,400mm long by 200mm wide by 170mm high, the cycle time was cut from 70 hours across two operations to 52 hours, a saving of more than a quarter. Similar reductions have been achieved on all of the parts, the smallest of which still involves 14 hours of machining.

As an indication of the amount of metal removal involved, a mid-size component measuring 1.1m long is machined from a 176kg titanium forging, which is reduced to 60% less at 67kg after machining.

The specification of the H 16000 at Filton includes axis travels of 2,400 x 1,600 x 1,600mm and a high torque, HSK-100A spindle rated at 2,292Nm/60kW/6,000rpm.

An unusual feature of this H 16000 is that it is one of very few such models built by Heller in an optional configuration without an automatic pallet changer (APC). The rationale is that if one had been integrated, the longest structural aircraft part, unless it were tilted, could not have been rotated in the 4th axis without interference with the guarding.

Little time is lost during component changeover, however, as extensive use is made of zero-point clamping on the fixture plates. Extra advantages of a non-APC arrangement are a smaller footprint and a door that opens wider, providing easier access for loading and unloading parts.

Davis added: "We already had experience of Heller's equipment and service, as one of their HF 3500 trunnion-type 5-axis HMCs has been in use here since the end of 2016, machining titanium parts in our additive manufacturing R&D department.

"It is noteworthy that this machine was actually manufactured in Redditch, as it is one of the 5-axis models that they have been designated to produce, along with the larger HF 5500."

www.heller.biz

 

Company

GKN

Related Articles

Mitsui Seiki HPX63 HMC latest evolution

Mitsui Seiki’s HPX63 II 4-axis horizontal machining centre, an improved version of the company’s proven HPX63 unit, features a 70% faster rapid feed rate of 54m/min that produces shorter cycle times, and a 14% reduction in shopfloor footprint (now 5,554mm x 3,530mm) to maximise manufacturing facility space.
4 years ago Products

Heller to partner with Seco at MACH 2020

German-owned Heller Machine Tools, whose factory in Redditch produces selected 4-axis and 5-axis horizontal machining centres for world markets, has entered into a distribution partnership agreement with Alcester-based Seco Tools (UK) and will join forces with the tooling supplier on the Heller stand at MACH 2020, hall 6, stand 172.
4 years ago News
Most recent Articles

Carter enjoys success at HAI HELI-EXPO event

Acknowledged as the World’s largest vertical aviation conference and trade show, HAI HELI-EXPO 2024 provided precision bearing specialists Carter Manufacturing a perfect opportunity to exhibit its extensive range of aerospace bearing installation, removal and testing tools, along with PMA bearing options.
2 days ago News

Login / Sign up