Using COTS: is it worth the risk?

AMMar19Features - eu automation
AMMar19Features - eu automation

Jonathan Wilkins, director of obsolete industrial parts supplier EU Automation, explains why the obsolescence risk of commercial off-the-shelf products (COTS) is just as prevalent today as it was during Concorde’s era.

 

2019 marks 50 years since the launch of Concorde. The British-French turbo-powered airliner seated up to 128 passengers and had a maximum speed over twice the speed of sound. Concorde was certainly ahead of its time, but some of the problems its designers encountered still exist today, such as those encountered when using COTS.

The obsolescence risk of using COTS is a recurring problem for military and commercial aerospace manufacturers. In fact, it’s estimated that 60% of the integrated circuits currently used in aerospace products will be obsolete in the next five years. The production cycles of today’s components are far too short to support aerospace products, whose lives regularly exceed over 30 years.

The reason COTS are so popular is that they offer military and aerospace system designers access to low-cost alternatives to full mil-spec parts. While these commercial products have not been specifically designed for this market, they do reduce time to market and production costs. When considering whether to use COTS in design, manufacturers should think about the product’s performance requirements.

For example, if the environment will be particularly demanding, such as the need to operate under high humidity or extreme shock and vibration, relying on COTS is not a viable option, as these parts are not designed for such extreme conditions.

As obsolescence is such a major concern, why did manufacturers use COTS in the first place? In the past, military components were in production for several decades, so obsolescence was never an issue. However, most of today’s commercial parts are in production for five years or less and this lifespan is continuing to shrink.

Take a graphics processor used in an aircraft display as an example. This type of technology is currently being redesigned, on average, every eleven months to keep up with changing demand. This results in frequent design changes, which all require recertification. Not only does this create additional work for design engineers, it also leads to a shortage of replacement components to support repairs.

The obsolescence risk associated with COTS is easier to manage when it’s considered in the product design stage. The timing of specific component redesigns cannot be predicted, but design engineers can anticipate general trends.

For example, a well-known principle of semiconductor products is Moore’s Law, which states that the number of transistors in a dense integrated circuit doubles every two years. Considering this at the design stage allows aerospace manufacturers to take advantage of newer technologies, without having to redesign an entire product.

So, what happens if a product is passed the design stage? Thankfully, there are fixes at every stage of production that can prevent a product from having to be completely redesigned. For example, industrial parts suppliers like EU Automation stock parts that have been made obsolete, so manufacturers don’t have to replace an entire system.

Concorde may have completed its final journey in 2003, but the race is by no means over. New technology has opened up exciting possibilities for super-fast air travel, like that provided by Concorde. Will it be that we always rely on COTS to get us from A to B?

EU Automation stocks and sells new, used, refurbished and obsolete industrial automation spares. Its global network of preferred partner warehouses, and wholly-owned distribution centres, enables it to offer a unique service within the automation industry, spanning the entire globe.

www.euautomation.com

Company

EU Automation

Related Articles

Editor's comment: Flying off the shelf?

Whilst researching material for a commercial off-the-shelf products (COTS) article, I was struck by the parallels with one of my pet hates: the decline of the high street shop.
4 years ago Features

It’s all in the management

In a Q&A session, Winslow Adaptics’ CEO and managing director, Teri-Ann Winslow looks at the company’s relationship with the International Institute of Obsolescence Management (IIOM) and how it has delivered advice and solutions to help customers overcome obsolescence and component shortage challenges.
4 years ago Features

Gone, but not forgotten!

Without careful obsolescence planning, not only could you be unable to manufacture or support your products, but threaten your customer’s business and ability to support equipment and platforms too. Mike Richardson discovers how companies and associations are working together to mitigate the issues.
7 years ago Features
Most recent Articles

Donite Plastics achieves AS9100 certification

Saintfield-based thermoforming company, Donite Plastics has achieved AS9100 aerospace quality management standard for the design, manufacture and assembly of thermoformed products, further reinforcing the company’s commitment to manufacturing high quality, reliable and safe products for the aviation, space and defence industries.
1 day ago News

Login / Sign up